dezly Contact us
Free crochet patternPattern 003
Amigurumi pattern

Tiny Crochet Teddy Bear Pattern Assembly Guide

Gallery image · 01
Completed tiny crochet teddy bear with a round head, oval snout, short arms, and seated feet. Save Pin
Finished teddy bear with seated feet and supporting tail.Click to enlarge and browse all images.

Crochet a compact teddy bear from ten pieces, then use the facial-placement and balancing notes to build a clear expression and steady seated pose. The edited pattern also resolves the snout’s stitch-count mismatch so its oval flows correctly into the next round.

Pieces
10 crocheted pieces
Hook
3.75 mm
Yarn
Worsted weight
Length
1,425 words · 7 min
Start the pattern Save Pin
DEZLY LLC Crochet TeamPublished August 30, 2026 · Updated August 30, 2026 · 7,923 characters
Article team
One guide, five editorial responsibilities.
Pattern writingInstructions and structureTechnical crochet editCounts and terminologyPattern reviewConstruction checkpointsVisual editingImages and captionsCopy & accessibilityClarity and reader access
How to use this pattern

Read the size and safety notes first. Make all ten pieces, count every round, embroider the snout before attachment, and use the flat-surface assembly checks to balance the seated pose.

Materials, scope, and pattern notes

Materials and tools

  • 3.75 mm crochet hook
  • Worsted-weight yarn in a bear color and a contrasting snout color
  • Two 8 mm safety eyes, or black embroidery thread for embroidered eyes
  • Black embroidery thread for the nose and mouth line
  • Fiberfill
  • Stitch markers
  • Yarn needle
  • Scissors and pins

Project details

Pieces
10: head, 2 ears, snout, body, 2 arms, 2 feet, and tail
Skills used
Magic ring, single crochet, increases, decreases, an oval around a chain, stuffing, embroidery, and seaming
Hook
3.75 mm
Yarn
Worsted weight
Gauge and size
Not provided; the final dimensions depend on yarn, tension, hook, and stuffing
Yarn quantity
Not provided
Terminology
US crochet terms

Work the pieces in continuous spirals unless a section says otherwise. This edited convention resolves the unstated round method in the supplied instructions. Mark the first stitch of every round, count the round before continuing, and move the marker upward as you work.

Abbreviations and counting

AbbreviationMeaning
mrmagic ring
st / stsstitch / stitches
chchain
scsingle crochet
incwork 2 single crochets in the same stitch
decsingle-crochet decrease over the next 2 stitches

Parentheses show a sequence to repeat, and “×” shows how many times to repeat it. Brackets give the stitch total after the round is complete. Chain stitches in the snout foundation do not count as a completed round.

Ears make 2

Round 1mr, sc 6 [6]

Round 2inc × 6 [12]

Rounds 3–4sc around for 2 rounds [12]

No ear stuffing is specified. Fasten off with a long sewing tail, flatten each opening, and sew through both layers to close it. Make both ears before attaching either one so you can compare their shape and placement.

Oval snout

The snout begins around both sides of a four-chain foundation. The sequence below gives the stated eight-stitch oval and flows correctly into the ten-stitch third round.

Foundationch 4

Round 2Starting in the second ch from the hook, sc in the next 2 ch, work 3 sc in the last ch; rotate to work along the unused loops on the opposite side, sc in the next ch, inc in the final ch [8]

Round 3(sc 3, inc) × 2 [10]

Fasten off with a long sewing tail. Before attaching the snout, embroider a filled triangular nose near its center and add one short vertical line below the triangle. Keep the stitches snug but not tight enough to distort the oval.

Three-step close-up of embroidering a triangular nose and short line on the crochet snout. Save Pin
Build the triangular nose with several horizontal stitches, then add the short center line.

Body

The body uses a simple rounded shape that narrows to a 12-stitch neck opening. Keep the base broad and distribute the stuffing evenly so the finished bear can sit against its feet and supporting tail.

Round 1mr, sc 6 [6]

Round 2inc × 6 [12]

Round 3(sc 1, inc) × 6 [18]

Round 4(sc 2, inc) × 6 [24]

Rounds 5–8sc around for 4 rounds [24]

Round 9(sc 2, dec) × 6 [18]

Round 10sc around [18]

Round 11(sc 1, dec) × 6 [12]

Round 12sc around [12]

Stuff the body firmly enough to support the head while keeping the neck edge flexible for sewing. Fasten off with a long tail for joining the body to the head.

Arms make 2

Round 1mr, sc 6 [6]

Rounds 2–7sc around for 6 rounds [6]

Add only a small amount of filling, concentrating it near the lower end. Flatten each opening, sew it closed through both layers, and retain a long tail for attaching the arm to the body.

Feet make 2

The paired increases in Round 2 form the wider front of each foot. Keep that fuller edge facing forward during assembly.

Round 1mr, sc 6 [6]

Round 2(inc × 2, sc 1) × 2 [10]

Round 3sc around [10]

Round 4dec × 2, sc 6 [8]

Round 5dec, sc 6 [7]

Fasten off with a long sewing tail and stuff each foot. Compare the two pieces before attachment so their wider fronts and decrease shaping face the same direction.

Supporting tail

Round 1mr, sc 4 [4]

Round 2sc around [4]

Fasten off with a long sewing tail. No stuffing is specified; flatten the opening and sew it closed. The exact attachment point is chosen during assembly so the tail can act as a small support behind the seated body.

Assembly and facial placement

Use pins for every placement decision before sewing. Work on a flat surface and check the bear from the front, side, and back after each major piece is attached.

  1. 1

    Join the head and body. Center the 12-stitch body opening against the base of the head. Sew around the neck, checking every few stitches that the face remains forward and the head is not leaning.

  2. 2

    Attach the snout. Pin the oval below and between the eyes. Check that the triangular nose sits on the facial centerline, then sew around the snout edge without pulling it out of shape.

  3. 3

    Position the ears. Pin both flattened ears before sewing either one. View the head from the front and above to compare their height, angle, and distance from the center.

  4. 4

    Add the arms. Place them slightly forward rather than directly on the side seams. This keeps the arms visible from the front and supports the compact seated silhouette.

  5. 5

    Balance the feet. Set the bear on a level surface, pin the feet near the lower front of the body, and adjust their angle until the figure can mostly support itself. Sew securely after both feet look even.

  6. 6

    Set the tail support. With the bear still on the flat surface, pin the tail low on the back. Move it until it touches the surface and helps prevent backward tipping, then sew it firmly in place.

Six-stage teddy bear assembly sequence from joining the head and body through positioning the ears, arms, feet, and tail. Save Pin
Use the six visual checkpoints to compare facial placement, limb balance, and the final supporting-tail position.

Final checks

  • Secure every seam and hide all remaining yarn tails inside the work.
  • Check that the snout is centered and that the nose embroidery is firmly anchored.
  • Compare both ears, arms, and feet from the front for balanced placement.
  • Place the bear on a level surface and confirm that the feet and tail create a steady seated pose.
  • If plastic eyes were used, recheck the washers and keep the bear away from children under three.

The compact teddy bear is now complete. You can change the yarn colors or embroider the eyes while preserving the same stitch counts and construction sequence.

Make the sailor penguin with a hat, bow, tummy patch, wings, feet, beak, and a tail that props it upright.

Know someone who would crochet this tiny bear?

Send the canonical article link so they receive the corrected snout count, complete instructions, and assembly images.