Sylveon Crochet Pattern: Complete Amigurumi Guide

Project Overview

• Project scope: Multi-piece amigurumi with narrow colorwork, felt details, and assembly
• Terminology: US crochet terms
• Hook: 3.00 mm
• Construction: Separate crocheted components joined by sewing
• Eyes: Two 10 mm safety eyes
• Sizes: One set of instructions; no size variations are provided

Materials and Tools

• White yarn
• Pink yarn
• Light blue yarn
• Blue or dark blue yarn
• Blue felt
• 3.00 mm crochet hook
• Two 10 mm safety eyes
• Polyester filling
• Fabric glue
• Yarn needle
• Bobby pins or sewing pins for marking and positioning pieces

Abbreviations

• MR: magic ring
• ch: chain
• sc: single crochet
• inc: work 2 sc in the same stitch
• dec: single-crochet decrease over the next 2 stitches
• dec3: decrease 3 stitches together to make 1 stitch
• sl st: slip stitch
• 4sc popcorn: popcorn made with 4 single crochet stitches
• [ ] x N: repeat the bracketed sequence N times

Numbers in parentheses are the stitch totals supplied for that step.

Preparation Notes

Keep color changes at the stated steps. The bows begin by crocheting around both sides of a foundation chain, and the ribbons are only two stitches wide, so work slowly when changing colors and hiding tails. Before sewing, pin the pieces in place to check symmetry.

Free Sylveon Crochet Pattern

Head

• 1. In white, MR 6. (6)
• 2. [inc] x 6. (12)
• 3. [inc, sc] x 6. (18)
• 4. sc, [inc, sc 2] x 5, inc, sc. (24)
• 5. [inc, sc 3] x 6. (30)
• 6. sc 2, [inc, sc 4] x 5, inc, sc 2. (36)
• 7–10. sc 36. (36)
• 11. [inc, sc 5] x 6. (42)
• 12–13. sc 42. (42)
• 14. [dec, sc 5] x 6. (36)
• 15. sc 2, [dec, sc 4] x 5, dec, sc 2. (30)
• 16. [dec, sc 3] x 6. (24)

Finish off, leaving a tail for sewing. Insert the safety eyes between Rows 10 and 11, with approximately 7 stitches between them. For optional blue eyes, use light blue felt or color the safety eyes with spray paint or nail polish; verify that any applied finish is suitable for the intended recipient.

Stuff the head now so the head cap can be checked for fit.

Head Cap

• 1. In pink, MR 6. (6)
• 2. [inc] x 6. (12)
• 3. [inc, sc] x 6. (18)
• 4. sc, [inc, sc 2] x 5, inc, sc. (24)
• 5. [inc, sc 3] x 6. (30)
• 6. sc 2, [inc, sc 4] x 5, inc, sc 2. (36)
• 7–10. sc 36. (36)
• 11. [inc, sc 5] x 6. (42)
• 12–13. sc 42. (42)

Finish off. Mark the first and last pickup points with two bobby pins, then pick up 7 stitches to form the triangular forehead.

• 14. Pick up 7 sc. (7)
• 15. dec, sc 3, dec. (5)
• 16. dec, sc, dec. (3)
• 17. dec3. (1)
• 18. ch to finish off. (1)

Finish off and use the tail to attach the cap to the head.

Body

• 1. In white, MR 6. (6)
• 2. [inc] x 6. (12)
• 3. [inc, sc] x 6. (18)
• 4. sc, [inc, sc 2] x 5, inc, sc. (24)
• 5. [inc, sc 3] x 6. (30)
• 6–8. sc 30. (30)
• 9. [dec, sc 3] x 6. (24)
• 10–12. sc 24. (24)

Finish off.

Legs (make 2)

• 1. In pink, MR 6. (6)
• 2. [inc, sc] x 3. (9)
• 3. sc 9. (9)
• 4–6. In white, sc 9. (9)

Finish off, leaving a tail for sewing.

Arms (make 2)

• 1. In pink, MR 6. (6)
• 2. [inc, sc 2] x 2. (8)
• 3. sc 8. (8)
• 4. In white, sc 8. (8)
• 5. dec, sc 6. (7)

Finish off, leaving a tail for sewing.

Tail

Main Tail

• 1. In pink, MR 6. (6)
• 2. sc 6. (6)
• 3. inc, sc 5. (7)
• 4. inc, sc 6. (8)
• 5–6. sc 8. (8)
• 7. inc, sc 7. (9)
• 8. sc 9. (9)
• 9. dec, sc 7. (8)
• 10. dec, sc 6. (7)
• 11. dec, sc 5. (6)

Finish off, leaving a tail for sewing.

Split

• 1. ch 4. (4)
• 2. Starting in the second chain from the hook, sc 3. (3)

Finish off, leaving a tail for sewing. Attach this shorter piece to the main tail to create the split or bump.

Ears (make 2)

• 1. In pink, MR 6. (6)
• 2. [inc, sc 2] x 2. (8)
• 3. sc 8. (8)
• 4. inc, sc 7. (9)
• 5. 4sc popcorn, sc 8. (9)
• 6. inc, sc 8. (10)
• 7–8. sc 10. (10)
• 9. [dec, sc 3] x 2. (8)
• 10–11. sc 8. (8)

Finish off, leaving a tail for sewing. Cut one rounded oval from blue felt for the inside of each ear and glue it in place.

PSave Pin

Bottom Fluffy Whiskers (make 2)

• 1. In pink, MR 6. (6)
• 2. sc 6. (6)
• 3. 4sc popcorn, sc 5. (6)
• 4. sc 6. (6)

Finish off, leaving a tail for sewing.

Bows (make 2)

• 1. In white, ch 7. (7)
• 2. Starting in the second chain from the hook, sc 6 down one side of the chain and sc 6 along the other side, making 12 sc total. (12)
• 3–4. sc 12. (12)
• 5. In pink, dec 6. (6)
• 6. sc 6. (6)
• 7. inc 6. (12)
• 8–9. In white, sc 12. (12)
• 10. sc 6, sl st 6.

Finish off, leaving a tail for attaching to the body. Use the tail to whip stitch the bow’s open edge closed.

Ribbons (make 2)

• Row 1. In light blue, ch 3. (3)
• Row 2. Starting in the second chain from the hook, sc 2, ch 1, turn. (2)
• Row 3. In dark blue, sc 2, ch 1, turn. (2)
• Row 4. In pink, sc 2, ch 1, turn. (2)
• Rows 5–28. In white, sc 2, ch 1, turn. (2)
• Row 29. In pink, sc 2, ch 1, turn. (2)
• Row 30. In dark blue, sc 2, ch 1, turn. (2)
• Row 31. In light blue, sc 2. (2)
• Row 32. sc 2. (2)

Finish off and hide the tails as neatly as possible.

Optional tubular ribbon: Keep the same number of rows and the same color-change sequence, but begin with MR 6 and work each following row as another round of 6 sc instead of working sc 2 and turning.

Assembly and Finishing

1. Stuff the head, body, and both legs. Do not stuff the arms, ears, bows, or tail.
2. Pin all pieces in position before sewing so you can assess spacing and balance.
3. Attach each ribbon to a bow first.
4. Attach the head cap to the head if it is not already secured.
5. Sew the ears to the head cap.
   • Pattern Note: The attachment step for the two bottom fluffy whiskers is not stated; the finished views show one positioned beneath each ear.

PSave Pin

PSave Pin

Your Sylveon amigurumi is complete, with all shaped pieces, felt ear inserts, bows, and striped ribbons in place.